|Search Products by Model-No:|
The CNCA-700 cuts Manufacturing Cost, improves Quality Standards.
With the fully automatic SPECTRUM CNCA-700, you can strip single stage wires and coaxial
cables up to diameters of 12.7 mm (0.5 inches) and lengths of up to 5 m ( 16.4 ft.) to many
stages in one operation. It is also possible to strip simple cables with only one insulation layer.
The SPECTRUM CNCA-700 is easy to program. If connected to a PC, the SPECTRUM
CNCA-700 is capable of storing an unlimited number of programs. The PC is not included with
the purchase of the machine.
The Machine cuts and trims coaxial cables automatically
It cuts and trims interfaces on semi rigid cables of diameters from 0.034" (0.86mm) and
smaller, and up to 0.5 inches (12.7mm);
The Machine cuts and trims interfaces on flexible cables from smallest diameter up to a
Diameter of 0.5 inches (12.7mm);
Easy adjustments in cutting lengths and diameters;
Rod feed for straight cable lengths of up to10 ft.;
Automatic turning equipment for spooled cable;
Two working spindles which feed and pick up the cable;
Both spindles turn simultaneously thus enabling material of smallest diameter to be
handled perfectly, without twisting, stretching or breaking;
Spindles are step motor controlled in Z-axis;
High speed saw for individual cutting operations, step motor controlled in Y-axis;
Stripping-and transportation arm, step motor controlled in Z-axis and compressed air
controlled in X-axis. The finished assembly is dropped onto the belt, delivering it to its
Easy set up;
Storage of an almost unlimited number of programs;
Easy change of cutting/stripping parameters.
Inexpensive tooling cost;