Search Products by Model-No:
|
|
|
|
GENERAL TECHNICAL DATA
Voltage: 230 V AC, 50 Hz, optional 120 V, 60Hz,
Current: 16 A
Air Pressure: 6-bar min.; 87 psi (clean and dry compressed air, filtered if necessary) Machine will turn off automatically when air pressure gets below 6 bar.
Operating Environment: Machine should be operated and stored in dry and heated rooms only, a temperature between 18° C and 25° C is preferred.
Maximal cable diameter of the coaxial cable: 12,7mm
Maximal length of finished product, the cut and stripped assemblies: 5.0 m (Can be extended with special options)
Spindle pitch in Z, A, X- axis: 8mm
Spindle pitch Y-axis: 5 mm
Revolutions of the cable: 120/minute max.
Revolutions of the cutting saw: 6,000/minute max.
Clutch: 24 V
Noise: 84 dB(A), (without the vacuum cleaner)
Personel: Only fully trained personel should operate the CNCA-700.
Repair & Maintenance: Before opening the power control cabinets, the electricity is
completely to be turned off. Make sure that the electricity cannot be turned back on by
anybody else but authorized personel!
Installation: It is recommended to use the provided fixtures and to mount the machine tightly to the ground.
Safety Specification: according to 89/392/EWG
Dimensions: Floor space: 140 x 78 cm, height: 212.5cm max, for details please refer to the drawings provided.
Net Weight: 293.00 kg (without options)
Notice: Technical Data are subject to change without notice.
|
|
|
